1-800-441-8780

1-773-735-0700

Industrial Packaging for Critical Contents

Drum It Up! Steel Drum Industry News, Trends, and Issues

Archive for January, 2017

What to Consider When Choosing a Dangerous Goods or Hazmat Drum

January 31st, 2017 by Howard Skolnik

Filed under: DOT/UN, HazMat, Safety, Skolnik Newsletter

When it comes to steel drums, it is important to know that the container you choose was designed and approved for your intended use. This is especially important when it comes to hazardous materials or waste. Just as there are a wide range of hazardous materials: explosives, gases, flammables, peroxides, infectious, radioactive, corrosive, etc; there are a wide range of hazmat drums. First, a shipper must determine whether or not the contents to be shipped is hazardous or non-hazardous. To make this initial determination, a shipper can consult with the US DOT, or a dangerous goods consultant. If it is determined that the contents is a regulated hazardous material, then the next step is to consider packaging options that will be complaint with Title 49 of the Code of Federal Regulations. The regulations specific to steel drums are in chapter 178.601.

Consider asking a dangerous goods consultant to determine the level of risk associated with your materials. Are they flammable? Do they produce toxic fumes? Is it an oxidizer? How does it react to water? Does it pose a threat to the environment? All of these characteristics could impact what linings, closures, fittings and materials you should consider when choosing a container. They also impact how your containers should be stored. For example, in case of a spill or leak, oxidizers should be kept separate from any flammable or combustible chemicals. In case of a fire, you’ll want to know how your materials react to water or other fire suppressors. Once you’ve found the appropriate container, keep your materials in their designated containers at all times, and always have a plan for possible leak or emergency situations. We suggest having Salvage Drums on hand to quickly encase any unexpected release of contents.

Every Skolnik steel drum was engineered for specific uses and are tested in accordance with the United Nations Recommendations. We are happy to help guide you to the appropriate packaging for your hazardous materials classification, and can even suggest resources to help you better understand, and comply with the hazards of your materials and/or how to properly dispose of any hazmat.

If you are not sure whether or not you are shipping, mailing, or in any way transporting a hazardous material, we have made special arrangements with Mr. Gene Sanders, of W.E. Train Consulting in Tampa, FL to address these questions. At no initial charge, Gene will assist Skolnik customers, and potential customers, for up to 15 minutes, to determine if the product they are shipping is a regulated product and thereby subject to the shipping requirements of the CFR. If it is a regulated product, Gene will then charge to assist in package selection and determinations of documentation requirements. The small upfront cost for properly shipping hazardous materials can save huge penalties for violation of these regulations. To contact Gene Sanders, you can reach him directly at: 813-855-3855 or gene@wetrainconsulting.com.

Decoding The Markings of a UN Packaging

January 24th, 2017 by Howard Skolnik

Filed under: DOT/UN, HazMat, Skolnik Newsletter

If a shipper understands the code used on UN certified drums, then the symbol and letters placed on the outside of a drum can give all the necessary information to determine what type of contents can be safely stored inside. If a shipper does not understand the code and is shipping a hazardous material, this can lead to a non-compliant and potentially dangerous situation. Below is an example of UN markings one might see on a drum.

1A2/X430/S/13/USA/(SDCC)

Click here for graphic UN code illustration

The first character used determines the type of container. Here, the number "1" is used because that is the UN code for drums. The letter "A" denotes the container is made of steel and the number "2" indicates it is an open head style. In the next section, the first character is the class rating for UN classifications. An "X" means the drum’s contents belong to the highest hazardous class (X, Y, Z with X being the highest risk and Z being the lowest). The next set of numbers is the tested weight in kilograms, so in our example the drum can hold 430 KG. The "S" indicates that the drum has been approved for holding solids, and the "13" denotes what year the drum was manufactured. Next is the country of origin followed by the unique manufacturer’s code which for Skolnik is “SDCC.”

Although there is no required placement for the marking, they must be placed somewhere easy to see, usually the top of the head or the side of the drum. Every drum that is larger than 100 liters (26.4 gallons) is required to have the markings in a second place, the bottom of the drum. Whereas the first marking can be added to the drum with paint or a label, this second must be permanent on the drum. This second marking can be embossed or etched into the steel as long as it is not removable. This second marking does not require the manufacturer’s code.

There is a minimum size requirement for the size of the letters, but there is not a specified color or font to use. Characters must be at least 12.0mm (0.47") high, and a color that stands out from the metal or paint on the outside of the drum.
It is important to use the drum as it was tested and to follow all Closure Instructions provided by the manufacturer. The number one concern in packaging is to prevent the escape of any contents, and only a drum manufactured and used properly can accomplish this goal.

Why Use Steel for Salvage Drums?

January 23rd, 2017 by Natalie Mueller

Filed under: HazMat, Salvage Drum

Salvage drums are containers designed and certified to hold other damaged, leaking or non-compliant containers. The drums are heavily regulated by the Department of Transportation (DOT) and rightfully so — nobody wants leaking containers holding hazardous goods to be shipped across public roads. While salvage drums can legally be made of steel, polyethylene, aluminum or metal, we recommend steel salvage drums over other materials.

The reason is fairly obvious: steel is stronger.

Salvage drums and overpack salvage drums differ from ordinary overpack drums in their certification to carry and protect damaged or leaking containers. Overpacks are designed to protect non-leaking containers or to be used as a combination pack.

While every salvage drum must pass, at a minimum, standard UN performance requirements for drums shipping solids as well as a 3 psi air leak proof test, Skolnik steel salvage drums go above and beyond. Our salvage drums are thicker, heavier and stronger than industry and DOT standards require.

Our steel salvage drums constructed of high quality carbon steel and are rigorously tested to ensure UN and DOT compliance. Our 85 gallon salvage drums are even T-rated, meaning they have passed the UN ‘T’ test allowing it to hold liquid or solid materials. This test and rating were created to give shippers the confidence that their damaged drum will be securely contained, even if it is holding liquid.

Federal law doesn’t require shippers to use steel salvage drums. However, when considering the safety of the environment and population, steel provides a peace of mind that other materials cannot.

The fines for non-compliance are almost as brutal as the certification tests themselves. Whether out of concern for the community or for your own good standing with the DOT, safe containment and transport of dangerous goods is not an area to skimp on.

Wine Symposium 2017 Panel Discussion: FSMA

January 17th, 2017 by Dean Ricker

Filed under: Skolnik Newsletter, Wine

After months of campaign speeches, debates and rallies, many Americans are ready to stop thinking about any and all news coming out of Washington, D.C. But for Lise Asimont, director of grower relations for Francis Ford Coppola Presents, a panel discussion about the Food Safety Modernization Act signed into law by U.S. president Barack Obama in 2011 is going to be a highlight of the Unified Wine & Grape Symposium taking place Jan. 24-26 in Sacramento. As program chair for the Unified Development Committee, Asimont will moderate the hour-long panel discussion Jan. 26. “We have very few mid-size wineries and smaller wineries that are going to be prepared” when the Food Safety Modernization Act (FSMA) is implemented for the wine industry, Asimont said. “FSMA is going to rock the world of compliance. We have seen food companies already changing their protocols, but we have not seen a lot of wineries do it.” Asimont told Wines & Vines that coming up with educational sessions that industry members can learn from and immediately apply to their vineyard and winery jobs is a key factor when choosing topics for the annual Unified Symposium, and FSMA is just one of the topics to fit that criterion. Clean plant strategies Another topic Asimont believes will be readily applicable for Unified attendees is the Jan. 25 session titled, “Looking Forward: How Grapevine Clean Plant Strategies Can Be Improved.” Asimont is moderating this session as well, and speakers include a who’s who of academics, viticulturists and vineyard owners. Deborah Golino, director of Foundation Plant Services at the University of California, Davis, is among the panelists, along with Marc Fuchs of Cornell University and Mike Means of Chateau Ste. Michelle Wine Estates, among others. “This is basically where the rubber meets the road on being pertinent with regard to needing clean plants,” said Asimont, adding that the discovery of red blotch-associated virus has triggered a huge replanting in California. “We want to give attendees the tools they need to confidently go into a nursery and say, ‘I want to test your stock.’” Asimont says there is a lot of coffee shop talk among viticulturists about who has clean materials and who doesn’t. The speakers booked for the Unified panel will discuss viruses they are concerned about and what testing is available. Golino will offer a preview of what FPS is working on, and the wine grape growing panelists will offer real-life examples of how they have successfully (or unsuccessfully) acquired clean vines. With the cost of replanting a vineyard starting around $35,000 per acre, not using clean materials is a huge threat to any investor. Skolnik Industries will be exhibiting at the show displaying our complete line of stainless steel wine barrels. You can find us at booth number 1205. For complimentary passes to the symposium contact Jason Snow at jason@skolnik.com.