1-800-441-8780

1-773-735-0700

Industrial Packaging for Critical Contents

Drum It Up! Steel Drum Industry News, Trends, and Issues

Posts Tagged ‘dot’

Overpack Container Regulations At-A-Glance

January 5th, 2017 by Natalie Mueller

Filed under: DOT/UN, HazMat, Salvage Drum

An overpack drum is a type of protective packaging manufactured to contain non-hazardous or hazardous materials or provide outer protection for another container to prevent or mitigate damage. At its most basic definition, an overpack is simply a large container in which another smaller container can be placed. Overpacks can be made out of any material — such as Skolnik’s steel overpack drums. The Department of Transportation (DOT) regulates the movement of all hazardous materials and have specific performance standards that overpack containers must meet.

Not to be confused with Salvage Drums or Salvage Overpack Drums, Overpacks are designed to protect non-leaking containers or to be used as a combination pack.

Because they are designed to provide additional protection, they are built stronger and must meet more stringent requirements than other containers.

So what are a few of those regulations?

  • Overpack containers must always have a UN marking on them that specifies the type of hazardous materials it is certified to contain.
  • An overpack will never have a liquids rating because it is designed to hold another container — a solid. Regardless of what the inner package contains, the overpack technically contains a solid.
  • The container inside an overpack must be intact — if the container is damaged, defective or leaking you must use a salvage drum.

Salvage drums, on the other hand, are certified to hold damaged, leaking or non-compliant containers and are held to even stricter regulations than overpack drums.

These are just a high level overview of the DOT’s overpack regulations. Remember that preparing hazardous materials for shipment can be complicated, and safety and compliance are key. Reserve the task of packing your hazardous materials for someone who has the appropriate DOT hazmat shipping training.

Skolnik Industries TIH (PIH) Overpack Drums range from a 20 gallon overpack to an 85 gallon overpack drum and are certified according to UN criteria and qualify as secure outer packaging. If you have any questions about using an overpack or salvage drum, don’t hesitate to ask your Skolnik representative.

Know your Linings

December 13th, 2016 by Natalie Mueller

Filed under: Safety

Carbon steel and stainless steel each possess properties that make them perfect containers for specific materials without any modification. But, for some materials, especially in the pharmaceutical, chemical and food industries, a drum lining is necessary. Lining is often required as a safety precaution, to meet the strict regulations of government agencies, and/or because the contents or environment would be contaminated without it. Even as a precaution, lined steel is a necessary measure to preserve the integrity of the materials, container, facility, handlers and the environment.

The most common lining for a lined steel drum is a phenolic coating. Phenolic linings provide a chemical protection between contained materials, such as food, and the metal of the drum. The phenolic is mixed with an epoxy to give it extra flexibility – this prevents it from cracking if the drum undergoes any damage. Skolnik lined carbon steel also includes a rust inhibitor to remove surface oil prior to lining. The upper tolerance for Skolnik’s epoxy phenolic lining is about 550 degrees Fahrenheit, after which the coating could become brittle and compromised.

A rust inhibitor will prevent flash rust on our unlined/uncoated drums, but if a customer needs a long-term rust resistant drum or a drum that can safely contain chemical materials, an unlined drum will not suffice.

Skolnik lined steel drums are available in a variety of different shapes, sizes, materials and lining compositions. We recommend talking to one of our sales representatives if you have any questions about your container needs, lining needs or your materials compatibility with linings.

What to Consider When Choosing Hazardous Waste Containers

November 17th, 2016 by Natalie Mueller

Filed under: HazMat, Safety

When it comes to containers, it is important to know that the container you choose was designed and approved for your intended use. This is especially important when it comes to hazardous materials or waste containers.

Just as there is a wide range of hazardous materials: explosives, gasses, flammables, peroxides, infectious, radioactive, corrosive; there are a wide range of hazardous waste containers. Knowing your materials and their characteristics is an important component of hazmat safety.

First, a shipper must determine whether or not the contents to be shipped is hazardous or non-hazardous. To make this initial determination, as hipper can consult with the US DOT or a dangerous goods consultant. If it is determined that the contents are a regulated hazardous material, then the next step is to consider packaging options that will be compliant with Title 49 of the Code of Federal Regulations. The regulations specific to steel drums are in chapter 178.601.

Consider asking a dangerous goods consultant to determine the level of risk associated with your materials. Are they flammable? Do they produce toxic fumes? Is it an oxidizer? How does it react to water? Does it pose a threat to the environment? All of these characteristics could impact what linings, closures, fittings and materials you should consider when choosing a container. They also impact how your containers should be stored. For example, in the case of a spill or leak, oxidizers should be kept separate from any flammable or combustible chemicals. In the case of a fire, you’ll want to know how your materials react to water or other fire suppressors. Once you’ve found the appropriate container, keep your materials in their designated containers at all times, and always have a plan for a possible leak or emergency situations.

One of the most common uses of Skolnik steel drums is in their use in managing the safe transportation and disposal of hazardous waste materials. Every Skolnik steel drum was engineered for specific uses and jobs. We are happy to help guide you to the appropriate packaging for your hazardous materials or waste, and can even suggest resources which help you better understand and comply with the hazards of your materials.

Process Drums: When and Why To Choose Them

October 6th, 2016 by Natalie Mueller

Filed under: Stainless Steel

The classic stainless steel drum is used in countless industries and for an immense variety of materials. Stainless steel drums are inherently suited for materials that require security or maintained purity throughout transport or storage. They are easy to sterilize, naturally resist oxidization and corrosion and are available in a variety of styles, linings and closures to better suit the job and any UN or DOT specifications.

Nearly every industry has some need for a steel drum container. For industries where materials are being stored before and after undergoing special processes, such as food processing, pharmaceuticals, or the fragrance and personal care industries, we recommend process drums. A process drum is a stainless steel container, typically manufactured as seamless and crevice-free, that offer extreme durability, purity and comply with domestic and international regulations. These drums feature a smooth, continuous, crevice-free interior and straight sides with no hoops to help prevent bacteria build up or other contaminants that may compromise the integrity of the materials being stored or transported.

Crevice-free, stainless steel process drums are ideal for meeting high sanitary standards and Skolnik process drums are thicker, heavier and stronger than industry standards require, so you can be confident your food, chemical or personal care products are safely contained.