1-800-441-8780

1-773-735-0700

Industrial Packaging for Critical Contents

Drum It Up! Steel Drum Industry News, Trends, and Issues

Posts Tagged ‘hazmat’

Keeping up with Compliance: UN Certified Packaging

March 24th, 2017 by Natalie Mueller

Filed under: DOT/UN

You are probably already a safe, savvy and compliant business, but sometimes even businesses who follow UN and DOT regulations don’t fully understand them. The shipping and storage industry is heavily regulated — especially when it comes to handling hazardous materials or consumer goods such as pharmaceuticals or food and beverage. All of these rules and regulations have been put in place to protect transportation workers, the environment and the population. But, when you purchase UN certified packaging, what exactly does that mean?

The Manufacturer

Let us break it down for you. When buying a UN certified drum, the entire design of the drum, and all of its components is defined by the test samples. Each element — heads, ring, gasket, bolt, nut, plugs — must meet UN specified requirements. If even one of these components, or the design of the drum itself, doesn’t measure up, the drum is not UN compliant. At Skolnik, we

The initial onus for meeting UN standards is on the manufacturer, but once a UN certified package leaves our hands, it is up the filler to maintain compliance.

The Filler

Users cannot alter or exchange any of these components without it impacting the ability for the drum to perform as tested and certified.

If you were to purchase a UN certified drum with a nut and bolt style closure, but later swap that closure for a Leverlock, this would void the UN certification. At this stage in the container’s lifecycle, it is the fillers responsibility to adhere to UN regulations. If replacement parts are needed, fillers must make sure that they get original components form the original manufacturer that continue to meet the test criteria of that specific drum.

Make sure you always follow Skolnik’s Closure Instructions to verify a proper closure before passing the buck to your shipper.

The Shipper

Once a drum is filled, compliance with the UN certification is the responsibility of the shipper. It is up to the shipper to read the UN code and ensure the container is safely stored or shipped according to its contents.

Remember, no matter where you are in the journey of a container, non-compliance comes with a hefty fine. Fines for non-compliant shipments, of dangerous goods especially, are getting larger and more frequent. For the sake of your employees, facility and community, please keep an eye on evolving regulations and restrictions to ensure your UN certified packaging maintains compliance at every stage.

Overpack Container Regulations At-A-Glance

January 5th, 2017 by Natalie Mueller

Filed under: DOT/UN, HazMat, Salvage Drum

An overpack drum is a type of protective packaging manufactured to contain non-hazardous or hazardous materials or provide outer protection for another container to prevent or mitigate damage. At its most basic definition, an overpack is simply a large container in which another smaller container can be placed. Overpacks can be made out of any material — such as Skolnik’s steel overpack drums. The Department of Transportation (DOT) regulates the movement of all hazardous materials and have specific performance standards that overpack containers must meet.

Not to be confused with Salvage Drums or Salvage Overpack Drums, Overpacks are designed to protect non-leaking containers or to be used as a combination pack.

Because they are designed to provide additional protection, they are built stronger and must meet more stringent requirements than other containers.

So what are a few of those regulations?

  • Overpack containers must always have a UN marking on them that specifies the type of hazardous materials it is certified to contain.
  • An overpack will never have a liquids rating because it is designed to hold another container — a solid. Regardless of what the inner package contains, the overpack technically contains a solid.
  • The container inside an overpack must be intact — if the container is damaged, defective or leaking you must use a salvage drum.

Salvage drums, on the other hand, are certified to hold damaged, leaking or non-compliant containers and are held to even stricter regulations than overpack drums.

These are just a high level overview of the DOT’s overpack regulations. Remember that preparing hazardous materials for shipment can be complicated, and safety and compliance are key. Reserve the task of packing your hazardous materials for someone who has the appropriate DOT hazmat shipping training.

Skolnik Industries TIH (PIH) Overpack Drums range from a 20 gallon overpack to an 85 gallon overpack drum and are certified according to UN criteria and qualify as secure outer packaging. If you have any questions about using an overpack or salvage drum, don’t hesitate to ask your Skolnik representative.

What to Consider When Choosing Hazardous Waste Containers

November 17th, 2016 by Natalie Mueller

Filed under: HazMat, Safety

When it comes to containers, it is important to know that the container you choose was designed and approved for your intended use. This is especially important when it comes to hazardous materials or waste containers.

Just as there is a wide range of hazardous materials: explosives, gasses, flammables, peroxides, infectious, radioactive, corrosive; there are a wide range of hazardous waste containers. Knowing your materials and their characteristics is an important component of hazmat safety.

First, a shipper must determine whether or not the contents to be shipped is hazardous or non-hazardous. To make this initial determination, as hipper can consult with the US DOT or a dangerous goods consultant. If it is determined that the contents are a regulated hazardous material, then the next step is to consider packaging options that will be compliant with Title 49 of the Code of Federal Regulations. The regulations specific to steel drums are in chapter 178.601.

Consider asking a dangerous goods consultant to determine the level of risk associated with your materials. Are they flammable? Do they produce toxic fumes? Is it an oxidizer? How does it react to water? Does it pose a threat to the environment? All of these characteristics could impact what linings, closures, fittings and materials you should consider when choosing a container. They also impact how your containers should be stored. For example, in the case of a spill or leak, oxidizers should be kept separate from any flammable or combustible chemicals. In the case of a fire, you’ll want to know how your materials react to water or other fire suppressors. Once you’ve found the appropriate container, keep your materials in their designated containers at all times, and always have a plan for a possible leak or emergency situations.

One of the most common uses of Skolnik steel drums is in their use in managing the safe transportation and disposal of hazardous waste materials. Every Skolnik steel drum was engineered for specific uses and jobs. We are happy to help guide you to the appropriate packaging for your hazardous materials or waste, and can even suggest resources which help you better understand and comply with the hazards of your materials.

Why Use Steel Drums for Dangerous Goods?

October 20th, 2016 by Natalie Mueller

Filed under: HazMat

Steel drums are one of the most popular containers for a variety of materials — including hazardous materials and dangerous goods. Several factors have contributed to steel drums’ rise to popularity in the shipping and storage of dangerous goods, but the steel drum experts at Skolnik have found that you don’t need to dig that deep to discover the main reasons steel drums are used for dangerous goods.

salvage

  1. Steel is strong. Sure, there are plastic and paper containers, but metal is stronger. Airplanes, aircraft carriers, and trains are made of metal, not plastic or paper. Strength is important when handling and transporting classified dangerous goods — therefore, more businesses choose steel drums over fiber or plastic drums, and more UN and DOT regulations require or recommend steel containers for dangerous goods.
  2. Steel is rigorously tested. Steel drums meet the highest levels of test performance of all non-bulk packaging. Skolnik steel drums are rigorously tested to meet stringent UN and DOT certifications, but also just to meet our own high-performance standards. We design and manufacture steel drums that get the job done and then some, and we test them accordingly. Plastic and fiber drums are not tested with the same intensity and precision as steel drums.
  3. Skolnik steel drums are special. We offer a range of packaging options, we specialize in steel drums and our engineers can customize drums for our customers’ unique needs. We are a company whose pulse is to find solutions to particular packaging, shipping or transport problems. We offer a diverse range of customization options including diameters, height, metal thickness, packaging, protective coatings, closures, placement of plugs and more. And, Skolnik steel drums are manufactured thicker, heavier and stronger than the industry standard requires.

We specialize in industrial packaging for critical contents and we recommend steel as the material-of-choice for packaging, storing and transporting dangerous goods and hazardous materials.