1-800-441-8780

1-773-735-0700

Industrial Packaging for Critical Contents

Drum It Up! Steel Drum Industry News, Trends, and Issues

Posts Tagged ‘industrial packaging’

The UN System for Dangerous Goods Packaging

August 10th, 2017 by Natalie Mueller

Filed under: DOT/UN, HazMat, Safety

Skolnik steel barrels are all UN tested for their contents/purpose. If a manufacturer or shipper fails to comply with UN standards, they could face hefty fines, litigation and more. It is always important for manufacturers to adhere to UN regulations, but for dangerous goods packaging the stakes are even higher because, in addition to a fine, failure to comply with UN standards for dangerous goods packaging could lead to a spill, disaster or contamination. But what does this mean? How does the United Nations affect packaging regulations?

The UN system for dangerous goods packaging is universally used and recognized. The system is used to classify, package, mark and label dangerous goods to facilitate their safe transport. All national and international regulations governing road, rail, sea and air transport are based on the United Nations’ system. With all manufacturers, suppliers and transport professionals following a single set of rules, the chances of contamination are greatly reduced.

The regulations dictate a minimum standard of performance. These performance standards are based on the intended contents of a package. Packages must exceed these standards before they can be authorized to contain and transport dangerous goods. The UN system starts with a sort of checklist of general criteria and specifications that the design of packages must meet. The packages then undergo rigorous physical testing before receiving UN certification.

At Skolnik, we pride ourselves in consistently engineering and manufacturing steel drums that exceed the UN certification criteria for dangerous goods and other uses. Our industrial packaging is designed and tested to be thicker, heavier and stronger than the industry standard, and our dangerous goods packaging is no different.

Calling All Customizations

April 15th, 2016 by Natalie Mueller

Filed under: Industry News

The standard size, gauge and closure options for steel drum containers exist to fill a wide range of containment needs for a wide range of materials. However, our customers’ storage and transportation needs are rarely one-size-fits-all. Even with all of the standard options, it’s common for businesses to require custom drums…and commodity steel drum manufacturers are not up the customization task.

Don’t search high and low looking for a vendor that can create a steel drum container to your precise design specifications – just call Skolnik. We offer a wide inventory of standard steel drum sizes, wider than many other manufacturers. And, when our standard selection doesn’t fit the bill, our in-house engineering team relishes the chance to build a custom steel drum container.

We welcome special requests, so never hesitate to ask us for:

  • Additional or reduced height drums
  • Special interior coatings
  • Custom plug, bung or flange placement
  • A drum-within-a-drum
  • Drums tested to meet non-standard requirements
  • And virtually any other special requirement you might have!

Deeply versed in all aspects of drum manufacturing, our engineers love a good challenge or custom request. Think of the Skolnik team as your own personal steel drum container think-tank, ready to brainstorm, innovate and deliver a drum to meet your precise industrial packaging requirements.