1-800-441-8780

1-773-735-0700

Industrial Packaging for Critical Contents

Drum It Up! Steel Drum Industry News, Trends, and Issues

Posts Tagged ‘steel salvage drum’

Why Use Steel for Salvage Drums?

January 23rd, 2017 by Natalie Mueller

Filed under: HazMat, Salvage Drum

Salvage drums are containers designed and certified to hold other damaged, leaking or non-compliant containers. The drums are heavily regulated by the Department of Transportation (DOT) and rightfully so — nobody wants leaking containers holding hazardous goods to be shipped across public roads. While salvage drums can legally be made of steel, polyethylene, aluminum or metal, we recommend steel salvage drums over other materials.

The reason is fairly obvious: steel is stronger.

Salvage drums and overpack salvage drums differ from ordinary overpack drums in their certification to carry and protect damaged or leaking containers. Overpacks are designed to protect non-leaking containers or to be used as a combination pack.

While every salvage drum must pass, at a minimum, standard UN performance requirements for drums shipping solids as well as a 3 psi air leak proof test, Skolnik steel salvage drums go above and beyond. Our salvage drums are thicker, heavier and stronger than industry and DOT standards require.

Our steel salvage drums constructed of high quality carbon steel and are rigorously tested to ensure UN and DOT compliance. Our 85 gallon salvage drums are even T-rated, meaning they have passed the UN ‘T’ test allowing it to hold liquid or solid materials. This test and rating were created to give shippers the confidence that their damaged drum will be securely contained, even if it is holding liquid.

Federal law doesn’t require shippers to use steel salvage drums. However, when considering the safety of the environment and population, steel provides a peace of mind that other materials cannot.

The fines for non-compliance are almost as brutal as the certification tests themselves. Whether out of concern for the community or for your own good standing with the DOT, safe containment and transport of dangerous goods is not an area to skimp on.

Overpack Container Regulations At-A-Glance

January 5th, 2017 by Natalie Mueller

Filed under: DOT/UN, HazMat, Salvage Drum

An overpack drum is a type of protective packaging manufactured to contain non-hazardous or hazardous materials or provide outer protection for another container to prevent or mitigate damage. At its most basic definition, an overpack is simply a large container in which another smaller container can be placed. Overpacks can be made out of any material — such as Skolnik’s steel overpack drums. The Department of Transportation (DOT) regulates the movement of all hazardous materials and have specific performance standards that overpack containers must meet.

Not to be confused with Salvage Drums or Salvage Overpack Drums, Overpacks are designed to protect non-leaking containers or to be used as a combination pack.

Because they are designed to provide additional protection, they are built stronger and must meet more stringent requirements than other containers.

So what are a few of those regulations?

  • Overpack containers must always have a UN marking on them that specifies the type of hazardous materials it is certified to contain.
  • An overpack will never have a liquids rating because it is designed to hold another container — a solid. Regardless of what the inner package contains, the overpack technically contains a solid.
  • The container inside an overpack must be intact — if the container is damaged, defective or leaking you must use a salvage drum.

Salvage drums, on the other hand, are certified to hold damaged, leaking or non-compliant containers and are held to even stricter regulations than overpack drums.

These are just a high level overview of the DOT’s overpack regulations. Remember that preparing hazardous materials for shipment can be complicated, and safety and compliance are key. Reserve the task of packing your hazardous materials for someone who has the appropriate DOT hazmat shipping training.

Skolnik Industries TIH (PIH) Overpack Drums range from a 20 gallon overpack to an 85 gallon overpack drum and are certified according to UN criteria and qualify as secure outer packaging. If you have any questions about using an overpack or salvage drum, don’t hesitate to ask your Skolnik representative.