1-800-441-8780

1-773-735-0700

Industrial Packaging for Critical Contents

Drum It Up! Steel Drum Industry News, Trends, and Issues

Using, and Keeping, Closure Instructions

October 25th, 2016 by Howard Skolnik

Filed under: DOT/UN, HazMat, Skolnik Newsletter

In previous Skolnik Newsletters, we have mentioned the need for drum users to follow the “Skolnik-Specific” Closure Instructions when closing a drum manufactured by Skolnik. Shippers of dangerous goods containers are required by DOT (49 CFR 178.2(c) to follow these specific instructions when preparing the completed package for shipment over public right-of-way. Closure combinations and drum designs vary from manufacturer to manufacturer and therefore, Closure Instructions are not generic. Recently, DOT has also stated that every time the drum is prepared for shipment, even if empty and going to a reconditioning or disposal facility, the closure instructions must be followed. Use proper calibrated tools when effecting closure and remember, it is the responsibility of the filler to not only follow these instructions, but also to reject a container that does not appear to be properly closed. A drum torqued at more or less than the prescribed foot pounds, a ring gap greater than or less than the specified distance, or gaskets which appear not to be properly seated onto the bead, should be rejected and returned to the manufacturer.

Share on Facebook

Leave a Reply