Drum It Up! Steel Drum Industry News, Trends, and Issues

Posts Tagged ‘spill prevention’

Assess and Address your Spill Risk before Secondary Spill Containment

December 13th, 2018 by Natalie Mueller

Filed under: Industry News

If you have a risk of spill, you need spill containment. If you need spill containment, it is probably best that you have a secondary spill containment plan as well. And, if they contain a hazardous substance, the EPA requires them to have secondary containment.

But how do you know if your facility has a spill risk? Well, almost every facility charged with storing or transporting a liquid will experience some type of spill. If the materials aren’t hazardous, your spill might not be critical and your secondary containment might not be required by governing bodies, but that doesn’t mean your spill isn’t dangerous.

Spills can be a slip hazard, an exposure hazard, a corrosive hazard. They can also cause expensive delays and non-critical damage.

A few things to consider when assessing your spill risk:

  • Your contents and their classes (first and foremost!)
  • The largest container in a given area
  • The size and slope of your space
  • Proximity of drains
  • Type and location of response supplies

Only then can you determine what type of spill risk is present and how you can address it. Every facility’s spill risk is different, but secondary spill containment can help mitigate them all the same. So talk to your Skolnik rep about our secondary spill containers today and start making strides toward a safer workspace and community.

Secondary containment requirements are addressed by the Environmental Protection Agency (EPA) through the Resource Conservation and Recovery Act (RCRA) contained in title 40 of the Code of Federal Regulations (CFR) part 264, the 2006 Uniform Fire Code (UFC) in standard 60.3.2.8.3 and in the 2012 International Fire Code (IFC) in 5004.2.

No Matter What, A Spill Response Plan is Crucial for Worker Safety

January 2nd, 2018 by Natalie Mueller

Filed under: Safety

While the end of December is a great time to look backward and take stock, it’s just as important to look ahead to make sure that 2018 is a successful, productive, and most importantly, safe year. The barrels we produce here at Skolnik are thicker, heavier, and stronger than industry standards, and their durability can help prevent spills. No matter the precautions taken though, accidents are an inevitable part of any workplace, and absolutely it’s crucial to have a spill response plan in place. Training, proper equipment, and products such as drum spill containers are important for starting the year out on the right foot.

The first component to any response plan is preparation. Thoughtful warehouse organization can minimize the damage done by a spill. For example, segregate anything that could react and produce harmful vapors or combustion. By keeping acids on one side of the warehouse and oxidizers on the extreme other side, you reduce the chance that they’d ever come in contact with one another and make an accident that much more dangerous.

Proper spill stations are also a key part of a safe workspace. Make sure each include absorbent pads, instructions, and PPE such as masks, gloves, goggles and face shields. These stations then need to be distributed strategically across the warehouse, paying extra attention to high risk areas such as receiving and shipping areas.

Spill response plans aren’t effective unless your employees know how to use them, and training is the most important element of any preparation. Awareness of the chemicals used in a workplace and adequate training on how to handle them will reduce a lot of potential accidents. Then, when the inevitable spill happens, your employees need to know what to do in an emergency, who the emergency contacts are, and how to effectively utilize spill stations. Safety data sheets also ought to be easily accessible.

The next component of a response plan is containment. When a spill occurs, the workers need to notify their supervisors, then carefully work on creating a perimeter. Using such products as an tube of absorbent material, or “snake”, they can prevent the spill from spreading further. From there, they can determine if they can manage the spill themselves or if it requires a third party company that is certified in handling the clean up.

If the spill is most appropriately handled by your employees, then the clean up process can begin. Most clean ups involve putting down absorbents, which come in various types. There is a range of absorption capacities, as well as general purpose products and specific use ones. With corrosive spills, neutralizing agents need to be used. Weak acids are used to neutralize bases and vice versa, but no matter the chemical, it’s important to work slowly to insure that the chemical is fully neutralized. Depending on the type of spill, you can recover some of the product and store it in containers such as Skolnik brand salvage drums.

While a good spill response plan is focused on the safety of your workers, a well crafted plan is also mindful of the environmental impact of the spill. Always be aware of the drainage system in your workplace to ensure that no dangerous chemicals wind up escaping out to the public at large.

As 2017 winds down, we here at Skolnik want to thank you for your partnership; we’re very proud of the work we done this year to help you and your company be the very best, and safe, it can be. It’s been a good twelve months, and we’re looking forward to another amazing twelve ahead of us. See you next year!

Secondary Spill Containment: The Power of Prevention

May 1st, 2017 by Natalie Mueller

Filed under: HazMat, Safety

Containing and transporting hazardous materials or potentially dangerous goods is not a task to be taken lightly. The DOT, UN and EPA all have their own specific regulations regarding the avoidance and management of hazmat leaks and spills and at Skolnik, we strive to prepare businesses and shippers with the tools they need to maintain compliance and keep everyone safe. A solid plan and preparation is the best defense against a potential spill. The EPA calls such planning SPCC, and while it is specifically written with oil spills in mind, we think it holds several important lessons and tips for the handling of any dangerous good.

What does SPCC mean?

SPCC stands for Spill Prevention, Control and Countermeasures and it is a key component of the EPA’s oil spill prevention program. Essentially, an SPCC plan is a prevention plan for oil spills and leaks related to non-transportation related on or offshore oil operations.

Prevention is Key

While the EPA also requires oil operations to have a facilities response plan in place – the first step to solving a disaster such as an oil spill is to avoid it all together.

When handling dangerous goods of any kind, it is always better to be safe than sorry. Hazardous materials pose a grave threat to your employees, facility, community and/or the environment as a whole. No matter how careful you are in your operations, there is always a risk of a spill or leak. That’s where an SPCC plan comes in — as a Plan B in case all of your other careful planning has failed you.

In the business of transporting and storing hazardous materials, the most common and trusted form of SPCC are drum spill containers, or secondary spill containers.

Drum Spill Containers / Secondary Spill Containers

Drum spill containers are containers used in the event of an industrial hazardous or chemical spill. All Skolnik steel spill containers are suitable for clean up use or as secondary containment. Secondary spill containers are used either in response to an already leaking package,  in which case the leaking package will be contained in the secondary spill drum, thus mitigating the dangers of the leak; or as a preventative measure, in which case a non-leaking container holding hazardous materials is sealed within a secondary spill container for transportation and storage as an extra safety measure.

Secondary containment requirements are addressed by the Environmental Protection Agency (EPA) through the Resource Conservation and Recovery Act (RCRA) contained in title 40 of the Code of Federal Regulations (CFR) part 264, the 2006 Uniform Fire Code (UFC) in standard 60.3.2.8.3 and in the 2012 International Fire Code (IFC) in 5004.2.